No. 4M218 Dayton® Shaded Pole Single Speed Fan and Blower Motor

3.3 inch Diameter, Mechanically Reversible, Totally Enclosed Air-Over, 1/40 horsepower

Contractor Friendly™ features offer unique design for mechanically reversing the rotation of the motor shaft. Easily removable clips enable quick removal of motor endshield and allow the rotor to be reversed to change roation. A specially designed stator/rotor ensures nameplate performance in either direction. Motors are set up CW rotation facing shaft end (welded end). Note: When mechanically reversed, UL and CSA compliance is voided. Uses: Designed with the contractor in mind, providing increased versatility. OEM and replacement use for a wide variety of air-moving applications.
Type: Shaded pole.
Service Factor: 1.0
Ambient: 40°C
Thermal protection: Auto
Bearings: All-angle, self-aligning sleeve
Insulation: Class A
Duty: Continuous air-over

Volts 60Hz: 115
Full-Load Amps: 1
Insulation Class: A
Stud Mounting Pattern: 2 7/8inches
Shaft Dimensions: 5/16 x 2inches
Length Less Shaft: 3 1/4inches
No. of Studs/Location 3/4inch stud mounting on both endshields.
Endshield is easily removed allowing rotor and shaft to be rotated, therby reversing rotation of motor.