No. 4M205 Motor

Commercial Duty, Condenser Fan, Standard Efficiency, 1/4 HP, Ball Bearings, 1075 RPM, 208/230V

Feature quick reversing leads. Water slinger on shaft.
Shaft up: shaft endshield and shell are totally enclosed. 3/4inch studs on shaft endshield. Opposite endshield is open.
Shaft up/down: Both endshields are totally enclosed with removable drain plugs on each endshield for maximum protection. Can be mounted vertically or horizontally.
Commercial duty motors feature higher starting torque than residential duty motors and offer universal replacement. Cooler running temperature ensures longer life performance. Motors include two flats on shaft, 90° apart.
Uses: Outdoor air conditioner condensers, refrigeration condensers. 2-speed models used on heat pumps.
Type: Permanent split capacitor
NEMA Frame: 48YZ
Body Diameter: 5 5/8inch
Service Factor: 1.0
Thermal Protection: Auto
Bearings: All-angle sleeve or double-shielded ball
Rotation: CW/CCW
Duty: Continuous air-over
Shaft: 1/2 x 6inch Double Flat

Nameplate RPM: 1075
Volts 60Hz: 208-230
Full-Load Amps: 1.7-1.6
Ambient °C: 60
Insulation Class: B
Mounting Shaft Position: Up/Down
Mount Type Stud