No. 3M867 Dayton® Permanent Split Capacitor Condenser Fan

High Efficiency, 2-1/2 inches Resilient Ring Mount with 4 sq in Stud Pattern, 1/2 horsepower, 825 RPM

Have water slinger on shaft. Drive end is enclosed for shaft-up mounting. Shaft is designed to fit all commonly used fan blades. Uses: New and replacement use in 5 ton or larger commercial outdoor condensers. Also used for commercial and industrial coolers, furnaces, and other shaft-mounted fan and blower equipment.
Type: Permanent split capacitor
Thermal Protection: Auto
Bearings: Double-shielded ball
Shaft: 1/2inch diameter shafts have flat; 5/8inch diameter shafts have flat and keyway.
NEMA Frame: 56YZ
Enclosure: Open
Volts 60Hz: 230
Full-Load Amps: 3.4
Mounting Ring OC: 7 7/16inches
Shaft Dimensions: 5/8 x 4inches
Length Less Shaft 7 7/8inches
Energy efficient product