No. 1D186 Dayton® Square Flange Pool Pump Motor

3/4 horsepower, 1/10 horsepower, 3450/1725 RPM, 9.8/4.1 Amps

The special 303 stainless steel 1/2inch-20 UNF-2A RH shaft is threaded 1/2inch from end. Two-compartment design protects components. Uses: Swimming pool pump applications only. Square flange frame mounting allow motors to be used as direct replacement on many popular pumps.
Enclosure: Open dripproof
Thermal Protection: Auto
Bearings: Locked shaft end double-sealed ball
Insulation: Class B
Rotation: CCW facing shaft
Finish: Black
1081 approvable
Note: Must match service factor and horsepower for proper replacement.
Rear canopy access.

Nameplate RPM: 3450/1725
Volts 60Hz: 115
Full-Load Amps at 60Hz Volts: 9.8/4.1
Service Factor: 1.65
Efficiency: Standard
Ambient: 50°C