No. 1D162 Dayton® Spa And Whirlpool Bath And Above Ground Pool Motors

Single Speed, Split-phase, 1 horsepower, 3450 RPM, 12.5 Amps

Easy access two-compartment design. Motors have 1/2inch diameter shaft 3/8inch-16 UNC-2A RH threaded 9/16inch from end. Uses: On pumps for spas, whirlpools, hot and jetted tubs. Replaces many popular spa and tub pump motors.
Enclosure: Open dripproof
Mounting: Rigid base with four No.8-32 extended through-bolts
Service Factor: 1.0
Ambient: 40°C
Thermal Protection: Auto
Insulation: Class B
Rotation: CCW facing shaft
Finish: Black
1081 Approvable
Note: Must match service factor and horsepower for proper replacement.

Nameplate RPM: 3450
NEMA Frame: 56Z
Volts 60Hz: 115
Full-Load Amps at 60Hz Volts: 12.5
Bearing Shaft/Rear: Ball/Sleeve
: Split-phase.