8300 Series Solaram™ Surface Pump

up to 960ft at 4GPM, to 400ft at 8.7GPM

This powerful pump pushes extremely high vertical lift through long pipelines, from shallow water sources. (Image shows Solaram pump with Linear Current Booster (an accessory) mounted in junction box on pump base). Solaram Surface Pump draws water from a shallow well, spring, pond, river or tank. It can push water uphill and over long distances for home, village, irrigation or livestock uses. It can use power directly from a photovoltaic array, to fill a storage tank.

Linear Current Booster (pump controller) is required to facilitate starting and to prevent stalling in low-light conditions (Use LCB6HV). A Solar Tracker is available to increase daily yield (typically 30%). See Solaram Surface Pump performance chart for power requirements. For 180V Models: Use a multiple of 10 modules in series.

Features

• Ultra-Efficient: Uses less power than ANY other pump in its range. Starts pumping in low light conditions
• Economical: Reduces power system cost by 25 to 75% compared to centrifugal or AC pumps
• Rugged and Reliable: Proven design with a 20-year life expectancy
• Simple to Maintain
• Dirt Tolerant
• Dry Run Tolerant
• Easy to Install

Recommendations

"We have four Solaram pumps working in Panama, one of them for six years. Another in the Sierra Tarahumara of Mexico is in its eighth year. Enough time has passed and water pumped for us to enthusiastically endorse the product."
Ed Crocker, Technical Director, Waterlines
Santa Fe, NM

Read more about Solaram™ 8000 Series Surface Pumps.

Specify model number when ordering

1 year manufacturers warranty against defects in materials and workmanship